When Kushan was engaged in defensive etching, he considered how to deal with this thing when it was acquired by the Han Dynasty. But the same thing still said, the Han Dynasty was the one who had the advantage, not the Kushan Dynasty.

Therefore, Kushan could only consider how to deal with the Han Dynasty's acquisition of this technology, but could not consider not using this technology.

At that time, Kushan specially found professionals to conduct detailed analysis and determined that this etching technology was quite complicated. Even if the Han Dynasty obtained the equipment mainly based on plate armor in the Han Dynasty, even if it was to be etched, it would cost a lot of manpower and material resources.

After all, the difficulty of etching on the plate armor is much greater than the difficulty of etching on the leather armor. Moreover, these etchings pay attention to patterns and depth. If there is a slight mistake, they will not be able to connect with the free spirit released by themselves and the external essence of heaven and earth.

Compared to using a metal engraving knife to outline the leather armor, after the outline is completed, relying on the essence of heaven and earth to close it, it is difficult to directly carve on the armor so that the top etching talents in Kushan cannot guarantee a 30% success rate.

You should know that once the etching on the armor is wrong, the difficulty of changing is too high, so you can only polish the previous etching patterns and re-engraved them. This process requires a lot of time and energy.

So after comprehensive consideration, Kushan thought that this thing could be used and might be used as a strategy to exhaust the enemy. What should I say in the end? This is just like the Koreans were afraid that Qin would beat him and sent Zheng to Qin to build Zheng Guo Canals and delay Qin's development.

What's worse is that Chen Xi's way of thinking is completely different from the way he uses human power in Kushan.

When Chen Xi got the defense etching pattern, he was not prepared to do any human etching. At this time, of course he had to directly press the pattern.

Anyway, all the needs of this thing are very clear. I asked someone to take some time to analyze and do a positive sculpt one by one, then carry out special warming, sacrifice secret magic spirits, and then directly suppress them on the armor.

As for the pressed etching patterns, this kind of pressed etching patterns cannot guarantee that they are finished products, or even the yield rate is very low, is this a problem?

This is not a problem!

What etching errors are extremely difficult to change?

I made a mistake and changed it to another one and continued to press it with the assembly line. I just pressed a set of patterns on the inside of the plate armor. If it succeeded, there would be defensive etching. If it failed, this thing was still a heavy plate armor. Anyway, there was no loss, so I could suppress it like this.

If the leather armor is tidied like this, if there is any problem with the pattern, the leather armor will definitely be useless. However, the heavy plate armor is different. If a circle of patterns is pressed out on it, it will not have any impact on the armor itself.

Stainless it if it is not done well?

Chen Xi would not do such a thing. If you don’t do it well, you won’t do it well. If you have more patterns, it won’t affect your defense. Just wear it. When you need to return to the furnace in two years, it will be red and softened slightly. A new plate armor will appear in the next second after the hydraulic forging machine.

Compared with the difficulty of manufacturing scales, the molds of the plate armor are very clear, and direct pressing can solve most of the links. In addition, only the plate armor and shield need to be defensively etched. These two things are really like pouring the softened steel into it and smashing it out for you a few strokes.

So when Chen Xi got the defensive etching, he never considered what messed up, what to do if he messed up, what to polish off this layer of etching, what time-consuming, nonsense, suppression, and direct suppression. Compared with other solutions, it is possible to directly use automatic etching and assembly line.

As for the initial yield rate of less than 2%, this is not a problem for Chen Xi. Anyway, it just builds an extra factory and does an extra process.

In Kushan's view, it was time-consuming and labor-intensive to do this thing, and it consumed the energy of the Han Dynasty. However, in Chen Xi's view, it was just added with a factory and an additional process. With such a factory and such a process, there was a 2% chance of top-level armor.

There is a 2% chance that 200 armor will reach the defense of 300 armor, and this only requires a handle, because Chen Xi is very rough. If you really want to say it, the cost is actually very low. Because Chen Xi does not pursue the so-called yield rate, he will use the direct assembly line suppression mode, just like the current forging and printing patterns, working in the idea of ​​achieving success and not being able to reverse.

Anyway, there is no cost to press this, and it becomes a profit. If it fails, it just presses it.

You should know that the essence of this etching is not to strengthen defense, but to directly enhance the thickness of the armor from a conceptual perspective and increase the thickness by 30%. In heavy plate armor, it is more than a lot stronger than strengthening the defense by 30%.

If the 5cm steel plate is thickened to 8cm, it should even be said to be a qualitative change. The former can be penetrated by Battery, while the latter may not have to be embedded on it. This is a big difference.

So at that time, Chen Xi's idea was to use a new forging assembly line, press the etching pattern, and the armor sent back to repair was also treated the same way. The small top-quality rate of 2% is of course the number of piles. The armor of the Han family's more than 100,000 shields can produce at least a few thousand pieces of equipment that can be used at a small top-quality rate of 2%.

Let’s talk about the first time that I didn’t etch, and the second time I sent it over for repair. During the remake, I’ll be the last time. Anyway, it’s the steel. After it’s burned soft, press it hard on the forging room. The previous etching will be gone. After that, it will be a 2% chance.

This cycle goes on and on, sooner or later, most plate armor will be burned on defense etching.

Chen Xi thought so and did the same. The problem is that Chen Xi considered the worst idea, but the reality is so bad that it is the worst every time?

Of course it is impossible. The Han Dynasty could not beat Kushan in secret techniques. Who gave Kushan a backend, but it was far superior to Kushan in terms of mechanical equipment development, assembly line, precision etching, etc.

After Xiangli's optimization of assembly lines, Nanyang Zhang's, Huang Yueying and others' secondary optimization of mechanical equipment, and a number of immortals' research on suppressing patterns, the original 2% yield rate quickly rose to 20% in this year.

Although there is a considerable difference compared to the 30% estimated by Kushan, Kushan is time-consuming and laborious polishing and etching. The Han Dynasty is a direct press of a water conservancy forging machine. The gap between the two sides is almost impossible to calculate by reason.

At least when Liu Bei received the first batch of 5,000 sets of plate armor with defensive etching from Chen Xi, Liu Bei's mind was a little buzzing. He understood the difficulty of this thing, but because of his understanding, he understood how outrageous it was to create so many defensive etching equipment.

Especially since all the things were almost exactly the same, there was no trace of repeated corrections even in the marks. Liu Bei knew that this thing was most likely brought to the assembly line by Chen Xi.

Because I have visited assembly line production before, Liu Bei knew very well that as long as anything can be put on the assembly line, the efficiency will be so high that it will be to kill all other things in the same industry.

Now that this thing has been moved to the assembly line, shouldn’t this be the top technology? Why has it suddenly become popular?

For this reason, Liu Bei went to the etching center on the Weishui River to take a look. He just felt that it was meaningless to not mention the yield rate at all. This was not a production idea at all.

"Zichuan is constantly changing clothes, and it will not take long to produce tens of thousands of shield armors with defensive etching." Liu Bei said to Zhu Jun with a complicated mentality.

Before seeing the assembly line that Chen Xi made, Liu Bei's understanding of defense etching was a high-end imperial technology. After seeing the assembly line of Chen Xi, Liu Bei felt that this thing was just ordinary civilian technology, and that the Kushan thoughts had not changed.

"Can you produce tens of thousands of pieces of this kind of thing produce?" Zhu Jun's mind buzzed. This is too outrageous. I thought this was the special equipment prepared for the general school. Are you really going to give all the shield guard equipment such an outrageous thing?

"Yes, tens of thousands of pieces have been produced. Zichuan now lets the factory work overtime to produce." Liu Bei nodded and said, "and our professionals are also developing a new generation of defense etching, hoping to create will defense etching."

If the will defense etching can be opened, the shield guard will basically eliminate all shortcomings. Even if there is a problem of insufficient attack power, it is not for the same level, let alone a large-scale shield guard. If there is more attack, it is actually not very meaningful, just push and crush it.

"Can you make all this kind of thing come out?" Zhu Jun said in disbelief. Even if he thought that if he could make all this kind of thing, what else would he do? What kind of soldiers should he train? Although Shield Guard is a basic military force, his physical fitness can be strengthened by muscle building needles and eating and drinking. Defense can be achieved by super plate armor and defense etching, and weaknesses in will can be controlled by will defense etching.

The whole militia soldiered until he was twenty-five years old and changed into armor. He was the top main battle legion. What other messes do you need? The talent tree has a lot of meaning in the face of this situation!

"I don't know, it should be OK, but it should take a lot of time. However, we have obtained the Rune of Luen. After we have learned from it, we have at least some directions." Liu Bei said with a smile, "The safety issues of soldiers will be further solved in the future."

Zhu Jun nodded silently. Even though his position as a general deeply felt that he would have to be eliminated when he really developed to that point, an old thing like him would have to be eliminated, but he had to admit that Liu Bei was right.

"I think it's necessary for me to try out new defensive talents." Zhu Jun said after a while, "Defensive etching has replaced the heavy armor talent to a certain extent. As expected, many things will be gradually eliminated due to changes in the times."

In the era of armor, the most popular type of defense talent was called defense blessing, which directly obtained fixed defense power. When the era of leather armor, scale armor, and chain armor, the popular defense talent was called defense strengthening, which directly enhanced the percentage defense power of leather armor, scale armor, and chain armor. When the Han Dynasty further developed into the Yuanfeng year, shield guard armor appeared, the popular talent became heavy armor defense, which directly added a certain concept thickness to the armor.

However, since the times have developed, Zhu Jun has realized that heavy armor defense cannot keep up with the trend of the times. When it comes to developing new defensive talents, if technology is not eliminated, it must lead the times. If you don’t want to be killed in this cruel profession of military strategist, then you’d better stand at the top of the times, otherwise you will be crushed to death sooner or later.

The other thing is directly said, "The waves in the Yangtze River push the waves in the front, and the waves in the front die on the beach." It is just a joke. No matter how miserable it is, it will not be lost. But the military strategist is not a joke, it is a profession that will really crush you to death.

"I won't say much about this. General Zhu knows more deeply than I do." Liu Bei said with a smile. Although he also understands it, it would be boring to show off in front of Zhu Jun. Now, many commanders of the Han Dynasty already have the concept of talent tree, but how to achieve the pinnacle at the tip of the talent tree is really not something that ordinary commanders can understand.

In Chang'an, when Liu Bei picked up Zhu Jun, Chen Xi had already sent someone to open the treasury to call various weapons and equipment. This time he was really planning to make a big deal in the world. The difference in time flow rates inside and outside the world caused many problems, and it was also an important reason why the Han Dynasty could not farm in the world.

From multiple aspects, the problem of determining the flow rate in the world is essentially just a rule problem caused by an ancient god being killed and exiled. Chen Xi felt that he could try to defeat this rule. Although it would not be defeated in the entire area, it would be no problem to break up some of the rules and prevent the Han Dynasty from being affected by this.

At the same time, the Yuan, Wang and Yang families in Central Asia also cleaned up all the elite backbones, brought their family's treasures to the tribe, and prepared to do a fierce battle in Africa. After all, it was really outrageous that Little Brahma could explode the land.

Compared with other things, the Han Dynasty's demand for land comes from the heart, not to mention that the land quality of Xiao Brahma revealed was very good. In this case, nothing big happened. The Yuan, Wang and Yang family, who had consolidated their own power in Central Asia, directly brought their own top-level military equipment, and even took out their own secret treasures and went to Africa under the leadership of the clan leader or acting clan leader. After all, for them, this is the greatest opportunity in life.

"Speaking of this, why do you have to carry such a coffin when you come?" Wang Chang, the acting patriarch of the Wang family, frowned somewhat at the large bronze coffin carried by the Yang family.

More importantly, Wang Chang has excellent knowledge, the etching of the patterns on this bronze coffin, etc., the more you look at it, the more scary it makes people feel. This seems to be an emperor coffin. Are your Yang family crazy? If you dig up the coffin of an emperor, it will really kill people.
Chapter completed!